Y RING

¥90,200

size:

SIZE CHART

NECKLACE LENGTH

RING SIZE

<BAND / POSITION / SLICE DIAMOND / ROUND etc.>
The size listed is the Japanese size.

Japan size	US SIZE	Inside Diameter(mm)	finger circumference(mm)
1	1	13	40.84
2	2	13.33	41.89
3	2.5	13.66	42.94
4	3	14	43.98
5		14.33	45.03
6	3.5	14.66	46.08
7	4	15	47.12
8	4.5	15.33	48.12
9	5	15.66	49.22
10	5.5	16	50.27
11	6	16.33	51.31
12	6.5	16.66	52.36
13	7	17	53.41
14	7.5	17.33	54.45
15	8	17.66	55.50
16		18	56.6
17	8.5	18.3	57.6
18	9	18.7	58.6
19	9.5	19	59.7
20		19.3	60.7

＜SLICE RING＞

slice size

Diameter S	Diameter L	Japan size	vertical(mm)	beside (mm)
◯	×	5	13.8	16
◯	×	6	14.2	16
◯	×	7	14.6	16
◯	×	8	14.9	16
◯	×	9	15.3	16
◯	△	10	15.6	S:16 L:17
◯	◯	11	16	S:16 L:17
△	◯	12	16.5	S:16 L:17
×	◯	13	16.9	17
×	◯	14	17.2	17
×	◯	15	17.5	17

-Points for choosing ring size

The size of a ring varies depending on the design and other factors, even if the number is the same.
If you want to know the size yourselfRefer to the following

【Arm width】

thick：Tendency to feel a little pressure due to the large adhesive surface between fingers
　　→ A slightly larger size is recommended.
thin：Tendency to turn easily and feel loose
　　→ A slightly smaller size is recommended.

【feeling of wearing】

Too tight
→ If you feel congestion or pain when you goop your hands
Too loose
→ When removing it, the joint, skin, or flesh is not caught and it comes off easily. Or if it comes off when you wave your hand.

【How to measure your own size】

Cut a long strip of paper about the width of the ring.
Wrap the paper around the thickest part, such as the second joint of your finger or the base of your finger.
Mark the areas where the paper overlaps with a pen.
Remove the paper from your fingers and measure the length of the marker.
Find the closest number in the "Finger Circumference" section of the ring size chart above.

2.0mm 2.5mm 3.0mm

size:

SIZE CHART

NECKLACE LENGTH

RING SIZE

<BAND / POSITION / SLICE DIAMOND / ROUND etc.>
The size listed is the Japanese size.

Japan size	US SIZE	Inside Diameter(mm)	finger circumference(mm)
1	1	13	40.84
2	2	13.33	41.89
3	2.5	13.66	42.94
4	3	14	43.98
5		14.33	45.03
6	3.5	14.66	46.08
7	4	15	47.12
8	4.5	15.33	48.12
9	5	15.66	49.22
10	5.5	16	50.27
11	6	16.33	51.31
12	6.5	16.66	52.36
13	7	17	53.41
14	7.5	17.33	54.45
15	8	17.66	55.50
16		18	56.6
17	8.5	18.3	57.6
18	9	18.7	58.6
19	9.5	19	59.7
20		19.3	60.7

＜SLICE RING＞

slice size

Diameter S	Diameter L	Japan size	vertical(mm)	beside (mm)
◯	×	5	13.8	16
◯	×	6	14.2	16
◯	×	7	14.6	16
◯	×	8	14.9	16
◯	×	9	15.3	16
◯	△	10	15.6	S:16 L:17
◯	◯	11	16	S:16 L:17
△	◯	12	16.5	S:16 L:17
×	◯	13	16.9	17
×	◯	14	17.2	17
×	◯	15	17.5	17

-Points for choosing ring size

The size of a ring varies depending on the design and other factors, even if the number is the same.
If you want to know the size yourselfRefer to the following

【Arm width】

thick：Tendency to feel a little pressure due to the large adhesive surface between fingers
　　→ A slightly larger size is recommended.
thin：Tendency to turn easily and feel loose
　　→ A slightly smaller size is recommended.

【feeling of wearing】

Too tight
→ If you feel congestion or pain when you goop your hands
Too loose
→ When removing it, the joint, skin, or flesh is not caught and it comes off easily. Or if it comes off when you wave your hand.

【How to measure your own size】

Cut a long strip of paper about the width of the ring.
Wrap the paper around the thickest part, such as the second joint of your finger or the base of your finger.
Mark the areas where the paper overlaps with a pen.
Remove the paper from your fingers and measure the length of the marker.
Find the closest number in the "Finger Circumference" section of the ring size chart above.

Variant

At first glance, this ring looks simple, but by making the inner curve higher than the conventional design, the entire arm is made to look as if it is floating a little. Depending on the angle of your hand, you can see a little of the inner arm, so you can set a diamond on it to make it shine slightly, or you can make the inner arm shiny to make it glow. Depending on how you arrange it, you can create a piece that is more than just simple.

MATERIAL
・Five types of metals
　K18 YG
　WG
　PG
　Pt900
・ The texture can be glossy or matte.

SIZE
　Size can be ordered.

PRECAUTIONS
・We accept orders at our direct sales stores and events at department stores.
　contact here
　For reservations here
・It takes about two months to receive the ring after the order is placed.
・We will contact you with a price quote for #19 and above.
・We offer free resizing within one month of purchase.
・Maintenance is free.

Attention

※The images shown are for illustrative purposes only. Please note that the appearance of each stone is different.
※Natural stones can be damaged if dropped or given a strong shock, so please handle them with care.

※If the item is not in stock, it can be ordered (approx. 1.5 months)
One-of-a-kind items such as natural stones and diamonds will be out of stock and cannot be ordered.
*It will take about one month to resize.
　<size chart>

※Cancellation or modification of ordered products

We will accept returns within 7 days of purchase only for one item or items over 30,000 yen.

Please note that we cannot accept returns of items that are not listed here, regardless of the payment method. Please note that we also cannot accept returns on custom-made items (including size orders).

For more information.here

Y RING

¥90,200